Anti Climb Fence Security Fence Galvanized 358 Fence Anti Climb Corrosion Fence |
358 Anti Climb Fence
358 Anti climb security fence, known as "prison mesh", is a high security anti-climbing and anti-cutting welded wire fence. Galvanized wire, commonly, is welded into fencing panels with extremely fine opening holes, which cannot be penetrated by hand fingers or cut by bolt cutters. Therefore it is highly recommended for high security needed area and private living field.
Property:
1.Anti-climbing - Due to the high-density mesh of the 358 guardrail, it is impossible to grasp the hands and feet, which plays a very good protection against climbing.
2.Anti-shear - the wire diameter is large, the mesh is dense, making the wire cut useless. 3.Beautiful appearance - the mesh surface is flat, and the perspective is higher.
"358" comes from its measurements 3"*0.5"*8" gauges which equates to approx.76.2mm*12.7mm*4mm(Length*Height*Diameter) in metric.
358 security fences are extremely difficult to penetrate with the small mesh aperture being effectively finger proof, and extremely difficult to attack using conventional hand tools.
Wire Diameter
|
4mm |
Aperture
|
76.2*127.mm, 75*12.5mm |
Height
|
≤6m |
Width
|
2.515m |
Finishi
|
Powder coated, PVC coated. Hot dipped galvanized |
OD
|
60*80mm, 60*120mm, 80*80mm |
Wall Thickness
|
2.0mm, 2.5mm, 3.0mm |
Surface Treatment
|
Powder coated,
Hot dipped galvanized |
Prison, Detention center, Psychiatric hospital, Airport, Bridge, Sub-station, Shipping port, Warehouse, Power plant, Laboratory, Petroleum and chemical facilities guarding, Industrial and commercial property, etc.
Fittings
Metal Clips or Metal Plate, it depends on you :)
1. Q: Can you design for us?
A: Yes, our professional technology department can design for by our advanced software. Merely send us your requirements in words or oral, we can do all additional work for you.
2. Q: We have a problem with spear crack from different suppliers when forming the spears. Do you have the same problem?
A: No, all spears are pressed before aging, so there is no crack on the sides of the spear.
3. Q: What about the delivery time of our products?
A: For standard fence panels, it needs 3-5 days to finish a full 40'HQ container. We have sufficient welders, so do not worry about a shortage of welders.
4. Q: Can you offer free sample?
A: Generally yes, of course, the customer needs to pay for the freight only.
5. Q: How about the delivery time?
A: Depending on the products, the products delivery time will be faster within 15-20 days, customized order may need a little bit longer.