| Garden Fence 10 FT Galvanized 2/3/4 Inch Chain Link Fence Garden Sports Fencing Playground Fence |
A chain-link fence (also referred to as wire netting, wire-mesh fence, chain-wire fence, cyclone fence, hurricane fence, or diamond-mesh fence) is a type of woven fence usually made from galvanized or LLDPE-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.
About Chain link Fence
The reason chain link fencing is so popular is mostly due to its relative low cost and the ease of which it can be installed. A handy person could install a chain-link fence themselves without too much trouble using a how-to guide, and without needing to hire a professional fencer. Usually concrete and angle iron are the posts used with chain link, but timber posts can be used too, if preferred. It also, being a transparent style of fence, does not block out sunlight, and the open style makes it ideal for particularly windy and exposed areas.
Wire Diameter
|
2mm-4mm |
Aperture
|
25*25mm, 50*50mm, 60*60mm, 80*80mm |
Height
|
1.5m, 1.8m, 2.0m or customized |
Length
|
10m, 15m, 20m, 30m |
Edge Types
- The wire is knuckled at both ends and is abbreviated as (KK).
- The wire is knuckled at the bottom and twisted into a barbed selvedge at the top and id abbreviated as (KB).
- The wire is twisted into a barbed selvedge at both ends and is abbreviated as (BB).
Mesh Options
Ranging from 3/8 to 2-3/8 inch mesh, we can customize any fabric size you need to meet your job specifications.
Wire Gauges
SPS can make chain link fabric in any of the below gauges. The most common gauges are 6, 9 and 11-1/2.
Process
1. Q: Can you design for us?
A: Yes, our professional technology department can design for by our advanced software. Merely send us your requirements in words or oral, we can do all additional work for you.
2. Q: We have a problem with spear crack from different suppliers when forming the spears. Do you have the same problem?
A: No, all spears are pressed before aging, so there is no crack on the sides of the spear.
3. Q: What about the delivery time of our products?
A: For standard fence panels, it needs 3-5 days to finish a full 40'HQ container. We have sufficient welders, so do not worry about a shortage of welders.
4. Q: Can you offer free sample?
A: Generally yes, of course, the customer needs to pay for the freight only.
5. Q: How about the delivery time?
A: Depending on the products, the products delivery time will be faster within 15-20 days, customized order may need a little bit longer.C
Audited Supplier 
){kind=link}
){kind=link}